The first ink pouring medium.
Daler-Rowney FW Acrylic Ink Pouring Medium is the first pouring medium to use with acrylic inks for even more outstanding results! Ideal to use with FW Acrylic Inks. Dries with a smooth even coloured film. Suitable for use on canvas, wood and other primed surfaces.
Preparation and Mixing Pouring.
1. Think about your colour design before preparing your pouring mix with FW Pouring Medium and System3, Aquafine, or FW Acrylic Ink.
2. Start preparing your pour in glasses or paper cups with a ratio of 2:1 medium to ink.
3. Transfer half of the ink into the medium and stir thoroughly with a pallet knife or stick. After stirring, fi nish adding the rest of the ink and stir until you are happy with the fluidity and colour intensity.
 
Pouring techniques.
Prepare as many colours as you like upfront. To test the fluidity, simply lift the pallet knife out of the mixture and if the mixture flows smoothly off of the pallet knife you are ready to pour.
Traditional Pour-- premix your colours and add each one to the desired surface separately. You can keep adding colours until you are happy with the finished product.
Dirty Pour-- just combine multiple premixed colours into one container and pour from there. The colours will mix and fl ow around eachother creating interesting and beautiful patterns that are diffi cult to recreate with a traditional pour.
Puddle Pouring --relies on adding colours in a controlled manner to the centre of the colour you have just added. The circles will expand and press against eachother without mixing too much.
Flip Cup-- is similar to the Dirty Pour, but rather than pouring the mixture, the container is fl ipped onto the canvas with the canvas acting as a lid. Then after settling, the cup is lifted off and the paint combines into new shapes.
 
Remark :
Place your canvas with the pouring art on a flat surface and let it dry for 24 hours.We would recommend applying a shockproof clear varnish to protect your design and get it ready for display.
 
Directions.
Mix 1 part FW Ink, System3 Ink or Aquafine Inks to 1 part pouring medium, then pour the colours over the chosen surface. 
 
Find out more the FW ink usage, and how to paint " Pour Painting/ Fluid Painting", click below :
https://www.daler-rowney.com/fw-acrylic-pouring-ink/
 
Daler-Rowney FW 丙稀墨水流體劑
第一種與丙烯墨水一起使用的流體介質，使其效果更加出色！
乾後形成用光滑均勻的彩色薄。適用於帆布、木材和其他底漆表面。
 
使用指引:
 1. 在使用 FW 丙稀墨水流體劑和 System3、Aquafine 或 FW 丙烯酸墨水均可, 準備澆注混合物之前，請先考慮您的顏色設計。
2. 開始準備倒入玻璃杯或紙杯，流體劑與墨水的比例為 2:1。
3. 將一半的墨水轉移到流體劑中，並用托盤刀或棍子充分攪拌。攪拌後，完成添加剩餘的墨水並攪拌直到您對流動性和顏色強度感到滿意。
 
澆注技術:
預先準備所須的顏色。要測試流動性，只需將托盤刀從混合物中提起，如果混合物順利從托盤刀上流出，您就可以傾倒了。
傳統傾倒--預先混合您的顏色並將每種顏色分別添加到所需的表面區域上。您可以繼續添加顏色，直到您對成品滿意為止。
塗鴉傾倒-- 只需將多種預混顏色混合到一個容器中，然後一併傾倒到畫面上。顏色將相互混合和流動，創造出有趣而美麗的圖案，這些圖案很難用傳統的澆注方式重現。
旋渦澆注--依賴於以可控的方式將顏色添加到您剛剛添加的顏色的中心。圓圈會擴大並相互擠壓，而不會混合太多。
Flip Cup --類似於 塗鴉傾倒，但不是傾倒混合物，而是將容器翻轉到畫布上，畫布充當蓋子。然後在沉降後，將杯子抬起，油漆組合成新的形狀。
 
記得將帶有澆注藝術的畫布放在平坦有避震的表面上，讓它乾燥 24 小時。
 
比例: 最少將 1 份 FW 墨水、System3 墨水或 Aquafine 墨水混合到 1 份澆注介質中，然後將顏色倒在選定的表面上。
 
如何以FW INK 畫流體畫, 以及它的其他用途, 點擊以下聯結便可:
https://www.daler-rowney.com/fw-acrylic-pouring-ink/